|
Post by Servo on Oct 13, 2011 0:29:12 GMT -5
Librarian (first try): ![](http://lh3.googleusercontent.com/-QOLKNYic8KE/TpMeYspJjdI/AAAAAAAAAKs/EsrQ8WRa69Y/s249/Librarian%252520%2525282%252529.jpg) Librarian (second try, using Twinkie's advice): ![](http://lh5.googleusercontent.com/-L_s-QcNfuc0/TqDczEusHWI/AAAAAAAAAOI/hGd7In8NDxI/s250/Librarian.jpg)
|
|
|
Post by ghostwheel11 on Oct 13, 2011 21:18:31 GMT -5
READ FROM THE BOOK!!!!
nice job dude!
|
|
|
Post by Sil Odan on Oct 14, 2011 7:57:00 GMT -5
In my head, I was hearing the librarian say (in a nasally, high-pitched voice) "See? Here? In this codex it says my character is bedecked with pistols. Does it look like I'm bedecked with pistols? Hmmm? I do not think I am bedecked with pistols!"
|
|
|
Post by Servo on Oct 14, 2011 10:31:00 GMT -5
I need to lookup how to photograph minis correctly.
Seems washed out and blurry.
|
|
|
Post by Mephiston on Oct 14, 2011 11:18:02 GMT -5
Don't take the picture while drunk. Everything looks blurry when you've been drinking.
|
|
|
Post by Sil Odan on Oct 14, 2011 12:22:02 GMT -5
The background is perfect; it allows you to see the model without anything behind it ruining the lines. Good lighting is key; you don't want to use a flash, it does horrible things to the model. And though it's not entirely necessary, a tripod would be a good idea to limit any amount of camera shake. Not that this should be a huge concern unless you are shooting at lower speeds, but hey...I'm a stickler that way.
|
|
|
Post by Servo on Oct 14, 2011 13:00:17 GMT -5
It is probably the camera settings. I am not good with photography, so I may have to play around with it.
I will try direct light rather than flash and I will use the timer to remove any chance of movement.
Thanks, Ellis.
|
|
|
Post by Sil Odan on Oct 14, 2011 14:23:59 GMT -5
Careful when using direct light on the model. You may want to set up some kind of rig to diffuse light over it rather than shine light directly on the model. Direct light might cause unwanted shine on portions of the model.
|
|
|
Post by JohnnyDangerous on Oct 19, 2011 4:55:32 GMT -5
According to what I learned from talking to my ex about this there are a few important things.
1) Use a curved sheet of white paper or rigid planar substrate behind the model to avoid harsh corners etc. 2) diffuse light might work, but lots of light is required... Afterall these are very small minis with very fine details. On dark models direct light may be needed, but also it depends on the glossyness of the finish. Many pros use a dull coat seal when they are done, which allows for a more extreme lighting situation. 3) You need a good camera, a phone on the camera is not probably good enough to get fine detail... Her camera was pro quality and you can really tell by the quality of the images it took. 4) A light box could be a good help as it helps with all of the above... 5) When all else fails, use photoshop! Im not saying place your face on all of your models faces and Wazzdakka's face on all of their behinds... Im talking about tweaking lighting and color to really bring out the existing colors... and show it in the pic how it looks in real life. In fact, how about I just ask her to write instructions... this is on the web and people might appreciate it in general...
|
|
|
Post by Servo on Oct 19, 2011 11:25:44 GMT -5
Very cool, thanks Tom.
I did use the curved paper, and I did adjust the lighting effects in Picassa.
I thought I was using a good enough camera, but maybe not. Also, I have very little knowledge of photography.
This was a test picture to see if Matt's scheme and my photography worked, so all the help is appreciated.
Where is everyone else's pics?
|
|
|
Post by twinkie1001 on Oct 19, 2011 19:02:10 GMT -5
Hey guys! The best way to photograph minis that I found was:
1) yes even curved white backdrop (unless your model is mostly white, use a black or gray backdrop) 2) even lighting, I like to use 2 small lights, one in each side. and turn off any other lights around. Watch for your shadows, either you want them or you don't. I rather not have any, but that's just me. If you don't want any shadows, try putting the lights above (45 degree angle-ish) the mini pointing down at the mini. this usually does not create any shadows, but play around with the lights and see what you like. 3) a good lens for max and awesome zoom! 4) a good DSLR camera is nice, but a little point and shoot will do just fine. anything over 8 megapixel will do 5) tripod 6) timer or shutter release.
Hope this helps a bit!
|
|
|
Post by Servo on Oct 20, 2011 15:05:09 GMT -5
Thanks Twinkie!
I will try some of these things today to see if they make a difference.
If not, I will whine to Ellis until he shows me how to use my camera.
|
|
|
Post by Servo on Oct 20, 2011 21:56:04 GMT -5
New attempt up top.
I think it looks a lot better.
Thanks Tom and Twinkie!
|
|
|
Post by Sil Odan on Oct 21, 2011 6:21:00 GMT -5
Wow, that is a definite improvement! And you didn't even have to whine. ![:)](//storage.proboards.com/forum/images/smiley/smiley.png)
|
|
|
Post by JohnnyDangerous on Oct 22, 2011 6:29:02 GMT -5
It looks crisper! But it does look a bit darker, is that from the lighting adjustment to make it look more accurate? Looks like your heading down the right path! Soon you'll be able to charge for mini weddings, mini graduations(I knew he would always earn his power armor some day), and miniature family pics!!! A certified pro!
|
|